SPA10AB
Spa0 Series
Single In-line Package DIP
Image shown represents the product series and may not indicate the actual part number
Toolbox
Downloads
The SPA series single in-line package DIP saves PCB space because of its thin single In-line packaging. Its retention feature holds part to PCB, prior to soldering – and its high-pressure contact system does not require tape sealing. C&K’s SPA switch is typically used for function controls, logic switching and address switching in industrial applications.
Features and Benefits
- Thin Single In-line Packaging saves PCB space
- Retention feature holds part to PCB prior to soldering
- High pressure contact system does not require tape sealing
Typical Applications
- Address switch for industrial controls
- Logic switching for computers and peripherals
- Function controlling for numerous applications
Specifications
-
Contact Rating:
Carry: 10 mA @ 5VDC; Switching: 0.1 mA @ 0.1m VDC min.
-
Electrical Life:
1,000 cycles min.
-
Contact Resistance:
50 milliohms max. @ 20 V DC 10mA.
-
Insulation Resistance:
100 megohms min. @ 100 V DC.
-
Dielectric Strength:
1 minute @ 300 V AC
-
Operating Temperature:
-30°C to 60°C
-
Solderability:
DIP & look solderability testing per C&K spec. #448. Unplated edges of terminals permitted
SPA10AB
-
Most Common:
Yes
-
Current Rating:
10mA
-
Circuit:
SPST
-
Mounting Type:
Thru-hole
-
Sealing:
Unsealed
-
Illumination:
No/None
-
Number of Positions:
10
-
Electrical Life Cycles:
1,000
-
Pitch:
0.100" (2.54mm), Full
-
Termination Style:
Thru-Hole, Right Angle
-
Height Above Board:
0.169" (4.30mm)
-
Actuator Type:
Slide (Standard)
-
Actuator Level:
Flush, Recessed
-
Washable:
Yes
- Process Features:
-
Contact Material:
Beryllium Copper
-
Contact Finish:
Gold
-
Voltage Rating:
20VDC
-
Packaging:
Tube